The module is designed and manufactured by our unique technology for converting heat source directly into electricity. The module is Bi-Te based thermoelectric module that can work at the temperature as high as 250 ºC. The thermoelectric module will generate DC electricity as long as there is a temperature difference across the module. The more power will be generated when the temperature difference across the module becomes larger, and the efficiency of converting heat energy into electricity will increase therefore. The module can be stuck with the high thermal conductivity graphite sheet on its both sides of the ceramic plates or apply thermal grease or other heat transfer compound when you install the module. The hot side of the module which marked “Hot Side” should be attached to the heat source.

TEMP Series Thermoelectric Power Module
TEMP1-0725-0.15	Size: 50 mm x 50 /55mm Open circuit voltage: 2.8 volts Matched load output resistance: 0.7 ohms Matched load output voltage: 1.4 volts Matched load output current: 2.4 amperes Matched load output power: 3.35 watts Heat flow across the module:55 watts Heat flow density:2.2 W· cm-2	Specification Sheet Download Power Module Installation Notes
TEMP1-08318-3.5T295	Size: 21 mm x 18 mm Open circuit voltage: 2.4 volts Matched load output resistance: 6.9 ohms Matched load output voltage: 2.4 volts Matched load output current: 0.35 amperes Matched load output power: 0.84 watts	Specification Sheet Download Power Module Installation Notes

If you did not find thermoelectric module that meets your requirements, we are ready to design the one at your request.